A-C® 1810A

Very low viscosity, medium density polyethylene (PE) homopolymer for use in solvent borne coatings, and in heat set and liquid solvent borne inks to improve mar and rub resistance by lowering the coefficient of friction. Can be used as a diluent in hot melt adhesives (HMAs) to lower viscosity at application temperature while improving substrate wetting, which leads to improved adhesion. Can also be used as a partial or complete Fischer Tropsch (FT) wax substitute.

Typical Uses

  • AdhesivesFischer-Tropsch Wax Extender| Improve Adhesion to Substrate| Lower Application Temperature| Prevent Oil Migration| Reduce Processing Time| Atomized
  • PlasticsAtomized
  • InksAnti-Blocking| Rub| Slip| Atomized
  • CoatingsAnti-Blocking| Mar Abrasion-Scratch Resistance| Matting| Release Feel and Touch| Slip| Atomized

Regulatory Approvals

  • Plastic Pipe Institute/NSF*No
  • FDA Indirect Approvals*No
  • FDA Direct Food Additives Approvals*No

Product Form and Size

  • Product FormPowder
  • Product FamilyPE homopolymer

Related TDS/SDS

Typical Properties

  • Hardness, dmm (ASTM D-5)2.0
  • Viscosity @ 140° C20
  • Drop Point, Mettler121°C(250°F)
  • Viscosity20 @ 140°C
  • Density0.95
  • Acid NumberNil